Professional Canon 450D (Rebel XSi) Repair
Why Choose Us for Canon 450D Repair
We fix what others couldn’t — or can’t.
Same-Day Repair
Original Parts
1–3 Month Warranty
Professional Team
Canon EOS 450D Service Prices
Prices exclude spare parts. Component-level repair whenever feasible. Express/priority queue available.
- Diagnostics – $0 if you proceed / $50 if declined
- Express repair (same day) – +50% to selected service
- No power / random shutdowns (rails, fuses, DC-DC) – from $155
- Main LCD replacement (3.0″) – from $115
- Shutter assembly replacement – from $200
- Mirror box / sub-mirror alignment – from $135
- AF module cleaning + calibration – from $110
- Hot shoe / flash sync repair – from $75
- SD/SDHC card slot repair – from $95
- USB 2.0 (Mini-B) port replacement – from $95
- Remote/AV board service – from $90
- Main dial / buttons rework – from $85
- Door seals & light-trap refresh – from $70
- APS-C sensor cleaning (wet swab + dust map) – from $55
- Body deep clean (ports + exterior) – from $50
- Battery door / latch repair (LP-E5) – from $65
- Top cover / rear shell replacement – from $150
- Main board / power regulation repair – from $165
- Firmware recovery / stuck on logo – from $80
- Lens mount & bayonet service (EF) – from $110
Final price depends on fault complexity and parts availability. Every repair includes full testing and a written warranty.
Typical Canon EOS 450D Issues We Fix
- Err 99 / random lockups — shutter path, flex or PCB faults.
- Main dial skips or double-steps — encoder clean/replacement.
- AF front/back focus — AF unit service and calibration.
- SD/SDHC errors — slot rebuild and controller check.
- Hot shoe misfires — oxidized contacts or cracked joints.
Rebel XSi — Error Codes Quick Hints
| Code | Meaning | First Aid |
|---|---|---|
| Err 20 | Mechanical fault | Power cycle; reseat lens/battery; service mirror/shutter if repeats. |
| Err 30 | Shutter problem | Try fresh LP-E5; inspect blades; likely shutter replacement. |
| Err 40 | Power/electrical | Clean contacts; avoid hot-plug; board diagnostics. |
| Err 70 | Data/processing | Reset; new SD card; firmware/board service if persistent. |
| Err 80/99 | General/image fault | Stop use; full diagnostics to isolate shutter/sensor/firmware path. |
Pro Tips for EOS 450D
- Use quality SDHC Class 10; avoid microSD adapters.
- Keep the main dial and hot shoe contacts clean to prevent skips and misfires.
- Store LP-E5 at 40–60% charge; full cycle occasionally for calibration.
- Avoid twisting the LCD cover in cold; plastic becomes brittle.
- If OVF focus differs from Live View, schedule AF unit calibration.
FAQ
1. The camera won’t power on or shuts off under load.
We test LP-E5 packs, DC-DC rails, fuses and protection, then restore the failing stage.
2. Main dial scrolls erratically.
We clean or replace the encoder, rework contacts and verify input logic.
3. Err 20/30/99 appears intermittently.
We isolate shutter/mirror flex and PCB paths, replace weak parts and stress-test.
4. Hot shoe misfires with speedlights.
We clean contacts, reflow cracked joints and validate sync timing.
5. SD slot errors or “Card not recognized”.
We rebuild the slot, straighten/replace pins, validate controller lines and test with certified media.
6. Stuck on logo / boot loop.
We perform a service reflash, verify boot partitions and check NAND integrity.