Professional Canon 600D (Rebel T3i) Repair
Why Choose Us for Canon 600D Repair
We fix what others couldn’t — or can’t.
Same-Day Repair
Original Parts
1–3 Month Warranty
Professional Team
Canon EOS 600D Service Prices
Prices exclude spare parts. Component-level repair whenever possible. Express queue available.
- Diagnostics – $0 if approved / $50 if declined
- Express repair (same day) – +50% to selected service
- No power / random shutdowns (rails, fuses, DC-DC) – from $160
- Vari-angle rear LCD assembly (3.0″) – from $135 (incl. flex/hinge)
- Shutter assembly replacement – from $210
- Mirror box / sub-mirror alignment – from $140
- AF unit clean + calibration – from $115
- Lens comms (Err 01) path service – from $95
- Pop-up flash (Err 05 / “BUSY”) – from $100 (microswitch/driver)
- Hot shoe contacts / sync rework – from $85
- SD slot pin repair (SDHC/SDXC) – from $100
- USB 2.0 (Mini-B) port – from $95
- HDMI (Mini, Type C) port – from $110
- Mode dial / buttons service – from $90
- Mic jack board (hiss / one channel) – from $115
- APS-C sensor cleaning (wet swab + dust map) – from $55
- Body deep clean (ports + exterior) – from $50
- Battery door / latch (LP-E8) – from $70
- Main board / power regulation repair – from $175
- Firmware recovery / stuck on logo – from $85
- Lens mount & bayonet service (EF) – from $115
Final cost depends on fault complexity and parts availability. Each repair includes full testing and a written warranty.
Typical EOS 600D Issues We Fix
- Vari-angle LCD goes blank, lines, or inverted — cracked ribbon; assembly swap.
- Err 01 with certain EF lenses — oxidized contacts or torn mount flex; rework/replace.
- Video: “Recording has stopped automatically” — slow card or thermal flag; media/thermal service.
- Pop-up flash stuck / Err 05 — hot-shoe microswitch jams; clean and free the switch, check driver.
- Mic jack crackle / one channel — fractured jack solder; jack board replacement.
EOS DSLRs — Error Codes Quick Hints
| Code | Meaning | First Aid |
|---|---|---|
| Err 20 | Mechanical fault | Power cycle; reseat lens/battery; service mirror/shutter if repeats. |
| Err 30 | Shutter problem | Try fresh LP-E8; inspect blades; likely shutter replacement. |
| Err 40 | Power/electrical | Clean contacts; avoid hot-plug; board diagnostics. |
| Err 70 | Data/processing | Reset; new SD card; firmware/board service if persistent. |
| Err 80/99 | General/image fault | Stop use; full diagnostics to isolate shutter/sensor/firmware path. |
Pro Tips for EOS 600D
- Use SDHC/SDXC UHS-I; avoid microSD adapters.
- For stable video pick V30 cards; clean vents to reduce thermal trips.
- Protect the swivel hinge; flex cracks in cold are common.
- Keep hot-shoe rails clean; stuck microswitch blocks pop-up flash.
- If OVF focus differs from Live View, book AF calibration.
FAQ – Canon EOS 600D
1. LCD works only at certain angles.
The ribbon in the hinge is fractured. We replace the display assembly and reseal the hinge.
2. “Recording has stopped automatically”.
We verify card speed, file system, and thermal flags. Media upgrade or thermal path service fixes most cases.
3. Err 01 with specific lenses.
We rework contacts, check the mount flex and iris control lines, and test with reference lenses.
4. Pop-up flash shows Err 05 or “BUSY”.
We free the hot-shoe microswitch, service the pop-up unit, and validate driver/cap charging.
5. Stuck on logo / boot loop.
Service-level reflash, boot partition checks, and NAND integrity test.