Professional Canon 6D Repair
Why Choose Us for Canon 6D Repair
We fix what others couldn’t — or can’t.
Same-Day Repair
Original Parts
1–3 Month Warranty
Professional Team
Canon EOS 6D Service Prices
Prices exclude spare parts. Whenever possible we repair at component level. Express/priority queue available.
- Diagnostics – $0 if you proceed / $55 if declined
- Express repair (same day) – +50% to selected service
- No power / random shutdowns (rails, fuses, DC-DC) – from $170
- Main LCD replacement (3.0″) – from $125
- Top status LCD replacement – from $135
- Shutter assembly replacement – from $220
- Mirror box / sub-mirror alignment – from $150
- AF module cleaning + calibration – from $120
- Hot shoe / flash sync circuit repair – from $85
- SD slot repair (UHS-I) – from $100
- USB 2.0 (Mini-B) port replacement – from $105
- HDMI (Type C) port replacement – from $115
- Buttons / main dial / joystick rework – from $95
- Wi-Fi / GPS board service – from $120
- Weather-seal refresh (doors, gaskets) – from $85
- Full-frame sensor cleaning (wet swab + dust map) – from $70
- Body deep clean (ports + exterior) – from $60
- Battery door / latch repair (LP-E6) – from $75
- Main board / power regulation repair – from $180
- Firmware recovery / stuck on logo – from $90
- Lens mount & bayonet service (EF) – from $120
Final cost depends on fault complexity and parts availability. Every repair includes full testing and a written warranty.
Typical EOS 6D Issues We Fix
- Err 20/30 during bursts — shutter or mirror drive; assembly service.
- AF misses or front/back focus — AF unit cleaning and calibration.
- Top LCD fading or missing segments — module replacement and reseal.
- SD errors / “Card not recognized” — slot rebuild and controller check.
- Wi-Fi/GPS malfunctions — antenna/board rework, shielding and retest.
EOS DSLRs — Error Codes Quick Hints
| Code | Meaning | First Aid |
|---|---|---|
| Err 20 | Mechanical fault | Power cycle; reseat lens/battery; service mirror/shutter if repeats. |
| Err 30 | Shutter problem | Try fresh LP-E6; inspect blades; likely shutter replacement. |
| Err 40 | Power/electrical | Clean contacts; avoid hot-plug; board diagnostics. |
| Err 70 | Data/processing | Reset; new SD card; firmware/board service if persistent. |
| Err 80/99 | General/image fault | Stop use; full diagnostics to isolate shutter/sensor/firmware path. |
Pro Tips for EOS 6D
- Use fast SDHC/SDXC UHS-I; avoid microSD adapters.
- Wi-Fi and GPS drain batteries; disable when not needed.
- Keep hot shoe and battery contacts clean to prevent dropouts.
- Store LP-E6 at 40–60% charge; full cycle occasionally for calibration.
- Stay current on firmware; verify AF microadjustment for primary lenses.
FAQ
1. The camera won’t power on or shuts off under load.
We check LP-E6 packs, DC-DC rails, fuses and protection, then restore the failing stage.
2. AF accuracy is inconsistent.
We clean the AF unit, verify sub-mirror geometry, update firmware and perform calibration with reference optics.
3. Err 20/30/99 appears intermittently.
We isolate shutter/mirror flex and main PCB paths, replace weak parts and stress-test.
4. Wi-Fi or GPS does not work reliably.
We service the radio board, check antenna lines and shielding, and validate connectivity.
5. SD slot errors or “Card not recognized”.
We rebuild the slot, straighten/replace pins, validate controller lines and test with certified media.
6. Stuck on logo / boot loop.
We perform a service reflash, verify boot partitions and check NAND integrity.