Professional Canon EOS M Repair
Why Choose Us for Canon EOS M Repair
We fix what others couldn’t — or can’t.
Same-Day Repair
Original Parts
1–3 Month Warranty
Professional Team
Canon EOS M Series Service Prices
Prices exclude spare parts. Component-level repair whenever possible. Express queue available.
- Diagnostics – $0 if repair is completed / $50 if declined
- Express repair (2–3 hours) – +50% to the selected service
- No power / won’t turn on (power-rail diagnosis) – from $135
- LCD display module replacement – from $115
- Top cover / rear shell replacement – from $150
- Sensor cleaning (wet swab + dust map) – from $60
- Body deep clean (ports + exterior) – from $50
- SD UHS-I card slot pin repair – from $80
- USB / micro-HDMI / Remote port replacement – from $95
- Shutter unit replacement – from $160
- Main board / power circuit repair – from $130
- Hot shoe repair – from $90
- Lens mount & bayonet rebuild (EF-M) – from $105
- Firmware recovery / stuck on logo – from $85
- Buttons / dials / flip-screen flex repair – from $95
Final cost depends on damage level and parts. Every service includes testing and written warranty.
Typical Canon EOS M Faults We Fix
- Won’t power on after storage/charge; LP-E12/LP-E17 faults or power board issues.
- Err 20/30/70 after moisture or update; shutter/board/firmware diagnostics.
- Flip screen goes black or touch fails; ribbon fatigue, hinge damage.
- HDMI doesn’t wake monitor; worn micro-HDMI, cable strain, handshake settings.
- Lens communication error on EF-M/adapter; mount contacts, bayonet alignment, adapter fit.
R/M-Series Error Codes — Quick Hints
| Code | Meaning | First Aid |
|---|---|---|
| Err 20 | Mechanical fault | Power cycle; remove battery/lens; service shutter if repeats. |
| Err 30 | Shutter problem | Fresh battery; inspect blades; likely unit replacement. |
| Err 40 | Power/electrical | Check contacts; avoid hot-plug PD; board diagnosis. |
| Err 70 | Data/processing | Reset; new SD; firmware/board rework if persistent. |
| Err 80/99 | Image/general fault | Stop use; full diagnostics to isolate sensor/firmware path. |
Pro Tips for EOS M
- Cards: single SDXC UHS-I slot; use V30+; UHS-II runs at UHS-I speed.
- Ports: micro-HDMI Type-D; keep cables short and strain-relieved.
- No IBIS across EOS M; prefer lens IS or Digital IS for video.
- Batteries: LP-E12 (M50/M200) or LP-E17 (M6 II). Check charger blink codes.
- Adapters: EF/EF-S via EF-EOS M; clean contacts to avoid lens comm errors.
FAQ – Canon EOS M Repair
1. Camera won’t power on.
We check LP-E12/LP-E17, fuses and rails, then rework or replace the board.
2. Flip screen glitches or loses touch.
We replace the ribbon or LCD module and service hinges.
3. Lens communication error.
We clean/repair contacts, rebuild bayonet, test EF-M and adapters.
4. HDMI monitor won’t wake.
We service the micro-HDMI port and adjust output/standby settings.
5. USB charging?
Most EOS M bodies don’t charge over USB. We supply DC coupler options for studio.