Professional Canon EOS R Repair
Why Choose Us for Canon EOS R Repair
We fix what others couldn’t — or can’t.
Same-Day Repair
Original Parts
1–3 Month Warranty
Professional Team
Canon EOS R Service Prices
Prices exclude spare parts. We repair at the component level whenever possible. Express queue available.
-
- Diagnostics — $0 if repair is completed / $50 if declined
- Express repair (2–3 hours) — +50% to the selected service
-
- SD UHS-II slot pin repair — from $95
- HDMI Type-C (mini) port replacement — from $120
- USB-C / Remote terminal replacement — from $115
-
- Sensor cleaning (wet swab + dust map) — from $80
- Main board / power circuit repair — from $160
- EVF or LCD module replacement — from $140
- M-Fn Bar / top buttons flex repair — from $110
-
- Lens mount & bayonet rebuild — from $130
- Hot shoe repair — from $95
- Firmware recovery / no boot — from $85
- Full pro maintenance (inspection + calibration) — from $120
Final cost depends on damage level and required parts. Every service includes testing and a written warranty.
Canon EOS R Repair — What You Get
Typical EOS R Faults We Fix
- “Card cannot be accessed”, slow buffer clears, or corrupted clips on SD cards.
- Loose or intermittent HDMI Type-C after cable stress; no signal to external recorders.
- Banding or rolling-shutter artifacts under LED light in Silent (electronic) shutter.
- M-Fn Bar unresponsive or over-sensitive; top cover flex wear.
- Hot shoe oxidation after moisture, accessory mis-detection, audio cut-outs.
R-Series Error Codes — Quick Hints
| Code | Meaning | First Aid |
|---|---|---|
| Err 20 | Mechanical fault | Power cycle; remove lens/battery; service if repeats. |
| Err 30 | Shutter issue | Charge battery; update firmware; likely unit replacement. |
| Err 40 | Power/electrical | Inspect contacts; avoid hot-plugging; board diagnosis. |
| Err 60 | Lens drive | Clean contacts; try another RF/EF lens; check mount. |
| Err 70 | Data/processing | Reset; new SD card; board rework if persistent. |
| Err 80/99 | Image/general fault | Stop use; full diagnostics to isolate sensor/firmware path. |
Pro Tips for EOS R
- Use fast UHS-II SDXC V60 cards for 10-bit and long bursts; there is only one slot.
- Protect the HDMI Type-C with a right-angle adapter and cage-mounted strain relief.
- Under LED lighting, switch from full Silent (electronic) to EFCS to reduce banding.
- For video, manage heat: prefer 4K30 for long takes, shade the body, and use USB-C power.
- No IBIS: pair with IS lenses or a rig/gimbal for smoother footage.
FAQ – Canon EOS R Repair
1. My EOS R drops HDMI or goes black on the monitor.
We replace the mini HDMI connector, then validate with recorders and add strain-relief guidance.
2. SD card errors or “card cannot be accessed”.
We repair bent pins or replace the slot, then test throughput and buffer behavior on UHS-II media.
3. M-Fn Bar is unreliable.
We service the top cover flex, clean contacts, or replace the bar assembly and recalibrate sensitivity.
4. Banding or rolling-shutter in Silent mode.
We profile your lighting, set EFCS, and tune shutter speeds to minimize artifacts.
5. Turnaround and warranty?
Standard 3–5 business days. Express 2–3 hours when parts allow. Warranty 1–3 months by job type.