Professional Canon EOS R10 Repair
Why Choose Us for Canon EOS R10 Repair
We fix what others couldn’t — or can’t.
Same-Day Repair
Original Parts
1–3 Month Warranty
Professional Team
Canon EOS R10 Service Prices
Prices exclude spare parts. Component-level repair whenever possible. Express queue available.
- Diagnostics – $0 if repair is completed / $50 if declined
- Express repair (2–3 hours) – +50% to the selected service
- No power / won’t turn on (power-rail diagnosis) – from $145
- LCD display module replacement – from $125
- Top cover / rear shell replacement – from $160
- Sensor cleaning (wet swab + dust map) – from $65
- Body deep clean (ports + exterior) – from $55
- SD UHS-II card slot pin repair – from $90
- USB-C / micro-HDMI / Remote port replacement – from $105
- Shutter unit replacement – from $170
- Main board / power circuit repair – from $145
- Hot shoe / Multi-Function Shoe repair – from $105
- Lens mount & bayonet rebuild – from $115
- Firmware recovery / stuck on logo – from $95
- Buttons / dials flex repair – from $110
Final cost depends on damage level and parts. Every service includes testing and written warranty.
Typical EOS R10 Faults We Fix
- Won’t power on after storage or charge; battery/charger comms or power board faults.
- Err 70 on startup or after moisture; requires board/firmware diagnostics.
- Overheating icon in extended 4K capture; thermal interface renewal and tests.
- HDMI handshake/wake issues with monitors; micro-HDMI socket wear or cable limits.
- Multi-Function Shoe compatibility problems; contact cleaning, jack replacement, adapter guidance.
R-Series Error Codes — Quick Hints
| Code | Meaning | First Aid |
|---|---|---|
| Err 20 | Mechanical fault | Power cycle; remove battery/lens; service shutter if repeats. |
| Err 30 | Shutter problem | Fresh battery; inspect blades; likely unit replacement. |
| Err 40 | Power/electrical | Check contacts; avoid hot-plug PD; board diagnosis. |
| Err 70 | Data/processing | Reset; new SD; firmware/board rework if persistent. |
| Err 80/99 | Image/general fault | Stop use; full diagnostics to isolate sensor/firmware path. |
Pro Tips for EOS R10
- Use UHS-II V60 SD cards; format in-camera; single slot supports UHS-I/II.
- For external monitors use short, quality micro-HDMI cables; avoid strain.
- If heat icon appears in 4K, switch to 1080p or allow cool-down.
- Use genuine LP-E17; resolve charger blink errors before reuse.
- Keep Multi-Function Shoe contacts clean; use AD-E1 for some legacy flashes.
FAQ – Canon EOS R10 Repair
1. Camera won’t power on.
We test LP-E17, charger comms, fuses and power rails, then rework or replace the board as needed.
2. Err 70 at startup.
We reflash, check SD/controller, and diagnose moisture-related damage.
3. Overheating icon in 4K video.
We renew thermal pads/paste and run stress tests. Settings advice provided.
4. External monitor doesn’t wake via HDMI.
We service the micro-HDMI port and update HDMI/standby settings for stable handshake.
5. Does R10 have IBIS?
No. Use lens IS or digital IS; we align mount and check sensor seat if frames tilt.
6. Which memory cards are recommended?
UHS-II V60 SDXC for 4K; V90 optional. Always format in-camera.