Professional Canon EOS R5 C Repair
Why Choose Us for Canon EOS R5 C Repair
We fix what others couldn’t — or can’t.
Same-Day Repair
Original Parts
1–3 Month Warranty
Professional Team
Canon EOS R5 C Service Prices
Prices exclude spare parts. We repair at component level where possible. Express queue available.
- Diagnostics – $0 if repair is completed / $60 if declined
- Express repair (2–3 hours) – +50% to the selected service
- Sensor cleaning (wet swab + dust map) – from $100
- CFexpress Type B slot pin repair – from $140
- SD UHS-II slot repair – from $120
- USB-C / HDMI Type-A port replacement – from $160
- Cooling fan module service / replacement – from $170
- Shutter unit replacement (stills mode) – from $210
- Main board / power circuit repair – from $195
- EVF or LCD module replacement – from $160
- Multi-Function Shoe / audio contacts repair – from $130
- Firmware recovery / no video OS boot – from $115
- Full pro maintenance (inspection + calibration) – from $150
Final cost depends on fault complexity and parts. Every service includes testing and written warranty.
Canon EOS R5 C Repair — What You Get
Typical EOS R5 C Issues
- Fan noise, dust ingress, or fan not spinning; thermal throttling in video OS.
- No boot into video mode, codec packs missing after update, or freezes in Cinema RAW Light.
- CFexpress card errors, slow buffer clear, or dropped frames with under-spec media.
- HDMI Type-A wobble after cage use without clamp; intermittent external monitor output.
- Timecode sync instability or loss after power events; shoe/audio contact oxidation.
- Unexpected shutdowns on weak USB-PD sources or worn batteries under 8K load.
R-Series Error Codes — Quick Hints
| Code | Meaning | First Aid |
|---|---|---|
| Err 20 | Mechanical fault | Power cycle; inspect shutter; service if repeats. |
| Err 30 | Shutter issue | Check actuation count; likely needs replacement. |
| Err 40 | Power/electrical | Inspect battery/contacts; board diagnosis may be required. |
| Err 60 | Lens drive | Clean contacts; test other RF lens; check mount. |
| Err 70 | Processing error | Reset; new card; service main board if persists. |
| Err 80/99 | Image/general fault | Stop use; run diagnostics; isolate sensor/firmware path. |
Pro Tips for EOS R5 C
- Use approved CFexpress Type B; avoid mixed slow SD when dual-recording proxies.
- Clean the fan intake regularly; replace the module if noise or spin-up issues persist.
- Power the camera with high-current PD or full batteries for 8K; weak sources cause shutdowns.
- Clamp the HDMI Type-A cable on cages to protect the port during gimbal/rig work.
- Keep firmware current; codecs and timecode features depend on correct versions.
FAQ – Canon EOS R5 C Repair
1. The camera won’t enter video mode or codecs are missing.
We reflash, restore codec packs, and verify boot partitions in the video OS.
2. Fan is noisy or thermal warnings appear.
We service or replace the fan module, refresh pads/paste, and stress-test 8K/4K modes.
3. CFexpress errors and dropped frames.
We repair the slot, replace bent pins, and validate with certified media under max bitrate.
4. Timecode drift or loss after power events.
We test the timecode path, clean contacts, and update firmware for stable sync.
5. External monitor flickers via HDMI.
Port replacement and cable-clamp rigging solve most signal drop issues.
6. Turnaround and warranty?
Standard 3–5 business days. Express 2–3 hours when parts allow. Warranty 1–3 months by job type.