Professional Canon EOS R5 Mark II Repair
Why Choose Us for Canon EOS R5 Mark II Repair
We fix what others couldn’t — or can’t.
Same-Day Repair
Original Parts
1–3 Month Warranty
Professional Team
Canon EOS R5 Mark II Service Prices
Prices exclude spare parts. We repair at component level whenever possible to avoid full module replacement. Express queue available.
- Diagnostics – $0 if repair is completed / $60 if declined
- Express repair (2–3 hours) – +50% to the selected service
- Sensor cleaning (wet swab + dust map) – from $100
- CFexpress Type B slot pin repair – from $140
- USB-C / HDMI / Remote port replacement – from $150
- Shutter unit replacement – from $220
- IBIS (in-body stabilizer) repair – from $210
- Main board / power circuit repair – from $190
- EVF or LCD module replacement – from $160
- Hot shoe / Multi-Function Shoe repair – from $130
- Lens mount & bayonet rebuild – from $160
- Firmware recovery / boot loop – from $110
- Full pro maintenance (inspection + calibration) – from $150
Final cost depends on damage level and parts. Every service includes testing and written warranty.
Canon EOS R5 Mark II Repair — What You Get
Typical EOS R5 Mark II Issues
- Overheating warnings during long 8K / high-FPS 4K sessions.
- CFexpress errors, bent pins, or slow buffer clearing with heavy bursts.
- Shutter wear after intensive sports/wildlife shooting.
- IBIS misalignment or rattle, resulting in tilted/soft frames.
- EVF/LCD artifacts or touch failure after impact or heat.
- Hot shoe corrosion or mic/accessory detection loss after moisture.
R-Series Error Codes — Quick Hints
| Code | Meaning | First Aid |
|---|---|---|
| Err 20 | Mechanical fault | Power cycle; inspect shutter/IBIS; service if persists. |
| Err 30 | Shutter issue | Check actuation count; likely needs replacement. |
| Err 40 | Power/electrical | Inspect battery/contacts; board diagnosis may be required. |
| Err 60 | Lens drive | Clean contacts; test with another RF lens; check mount. |
| Err 70 | Processing error | Reset settings; try new card; service main board if persists. |
| Err 80/99 | Image/general fault | Stop use; run diagnostics; isolate sensor/IBIS/firmware issue. |
Pro Tips for EOS R5 Mark II
- Use pro-grade CFexpress Type B and keep card firmware up to date.
- Avoid hot-swapping power or media while the write LED is active.
- Plan cooldowns for long 8K/high-FPS sessions to prevent thermal throttling.
- Protect the EVF from direct sun; use the eyepiece cap when backlit.
- Annual pro maintenance is recommended for event/sports workloads.
FAQ – Canon EOS R5 Mark II Repair
1. Does the R5 Mark II overheat in long takes?
Possible in 8K or high-FPS 4K. We service the thermal path and verify fan/paste/pads for stable capture.
2. “Card cannot be accessed” appears with CFexpress.
Often bent pins or media faults. We replace the slot and validate with certified media.
3. Can you replace the shutter and calibrate?
Yes. We install OEM shutters, calibrate exposure, and reset counters.
4. IBIS shows tilt or rattles after a bump.
We recalibrate or replace the IBIS assembly and test across focal lengths.
5. EVF or LCD has artifacts after heat or sun.
Panel/module replacement restores function. Prevent with eyepiece cap and shade.
6. Turnaround and warranty?
Standard 3–5 business days. Express 2–3 hours when parts allow. Warranty 1–3 months by job type.