Professional Canon EOS Ra Repair
Why Choose Us for Canon EOS Ra Repair
We fix what others couldn’t — or can’t.
Same-Day Repair
Original Parts
1–3 Month Warranty
Professional Team
Canon EOS Ra Service Prices
Prices exclude spare parts. We repair at the component level whenever possible. Express queue available.
-
- Diagnostics — $0 if repair is completed / $50 if declined
- Express repair (2–3 hours) — +50% to the selected service
-
- SD UHS-II slot pin repair — from $95
- micro-HDMI (Type D) port replacement — from $120
-
- Sensor cleaning (astro-safe, wet swab + dust map) — from $90
- IR-cut/low-pass filter service (replace/re-convert) — from $240
- Main board / power circuit repair — from $160
- EVF or LCD module replacement — from $140
-
- Lens mount & bayonet rebuild — from $130
- Hot shoe / Multi-Function Shoe repair — from $95
- Shutter replacement (EFCS/mechanical) — from $140
- Firmware recovery / no boot — from $85
- Full pro maintenance (inspection + calibration) — from $120
Final cost depends on damage level and required parts. Every service includes testing and a written warranty.
Canon EOS Ra Repair — What You Get
Typical EOS Ra Faults We Fix
- Long-exposure noise, hot pixels, amp glow on warm nights.
- Color cast for daytime shooting after astro conversion; WB issues.
- “Card cannot be accessed” or slow buffer with UHS-I media.
- micro-HDMI wobble, flicker, or no signal to external monitor/recorder.
- Dust or smudges on the IR-modified filter causing donut artifacts and gradients.
R-Series Error Codes — Quick Hints
| Code | Meaning | First Aid |
|---|---|---|
| Err 20 | Mechanical fault (aperture/curtain path) | Power cycle; remove lens/battery; service if repeats. |
| Err 30 | Shutter operation issue | Fresh battery; firmware check; diagnosis if persistent. |
| Err 40 | Power/electrical | Clean contacts; avoid hot-plugging; board test. |
| Err 60 | Lens drive | Clean contacts; test another RF lens; mount check. |
| Err 70 | Data/processing | Reset; new SD card; board rework if needed. |
| Err 80/99 | Image/general fault | Stop use; full diagnostics for sensor/firmware path. |
Pro Tips for EOS Ra
- Use fast UHS-II SDXC V60 cards; format in-camera for long exposures.
- Protect the micro-HDMI with a right-angle adapter and cage/strain relief.
- For daytime color, add a UV/IR-cut clip-in or set a custom white balance.
- Use EFCS to minimize vibration on telescopes; avoid touching the setup during exposures.
- For long sessions use LP-E6NH packs or a DC coupler; keep the body shaded to limit sensor heat.
FAQ – Canon EOS Ra Repair
1. Can you revert an EOS Ra to normal color response?
Yes. We replace the IR-modified filter with OEM-spec glass and recalibrate AF and flange distance.
2. I see hot pixels and glow in long exposures. Can you fix it?
We remap pixels, service thermal pads, verify power rails, and test dark-frame performance.
3. Daylight images look too red after astro conversion.
We install a UV/IR-cut, set a custom WB, or perform a reversible re-conversion for neutral color.
4. The camera says the SD card can’t be accessed.
We replace bent pins or the slot, then validate throughput with UHS-II cards under continuous shooting.
5. My micro-HDMI port is loose or drops signal.
We replace the Type-D connector and advise strain-relief so the new port lasts.
6. Turnaround and warranty?
Standard 3–5 business days; express 2–3 hours when parts allow. Written warranty 1–3 months by job type.