Professional Canon EOS RP Repair
Why Choose Us for Canon EOS RP Repair
We fix what others couldn’t — or can’t.
Same-Day Repair
Original Parts
1–3 Month Warranty
Professional Team
Canon EOS RP Service Prices
Prices exclude spare parts. Component-level repairs whenever possible. Express queue available.
- Diagnostics – $0 if repair is completed / $50 if declined
- Express repair (2–3 hours) – +50% to the selected service
- Sensor cleaning (wet swab + dust map) – from $70
- SD/UHS-II card slot pin repair – from $90
- USB-C / Micro-HDMI / remote port – from $110
- Shutter unit replacement – from $160
- Main board / power circuit repair – from $140
- EVF or LCD module replacement – from $120
- Hot shoe / Multi-Function Shoe repair – from $85
- Lens mount & bayonet rebuild – from $110
- Firmware recovery / stuck on logo – from $75
Final cost depends on damage level and parts. Every service includes testing and written warranty.
Canon EOS RP Repair — What You Get
Typical EOS RP Faults We Fix
- “Card cannot be accessed”, bent SD pins, intermittent write errors.
- Err 20/30/40/70 on startup or during shooting.
- Stuck on logo after update, failed firmware flash.
- EVF black spot/lines after sun exposure, LCD touch failure.
- Flip-screen ribbon damage, no display when opened/rotated.
- Hot shoe corrosion and lost accessory detection after moisture.
R-Series Error Codes — Quick Hints
| Code | Meaning | First Aid |
|---|---|---|
| Err 20 | Mechanical fault | Power cycle; remove battery/lens; service shutter if repeats. |
| Err 30 | Shutter problem | Fresh battery; inspect blades; likely unit replacement. |
| Err 40 | Power/electrical | Check contacts; avoid hot-plug; main board diagnosis. |
| Err 70 | Data/processing | Reset; new SD; firmware/board rework if persistent. |
| Err 80/99 | Image/general fault | Stop use; full diagnostics to isolate sensor/firmware path. |
Pro Tips for EOS RP
- Use name-brand UHS-I/II SD cards; update card firmware where available.
- Do not remove power or card while the write LED is active.
- Protect the EVF from direct sun through the eyepiece; use the cap.
- Prefer Canon LP-E17 batteries; unstable third-party packs may cause lockups.
- After rain/salt spray: remove battery, dry 24h with desiccant, then test.
FAQ – Canon EOS RP Repair
1. Does EOS RP overheat in 4K?
Rare in normal use. We service thermal pads/paste, update firmware, and test sustained capture if it occurs.
2. “Card cannot be accessed” on RP. Cause?
Often bent SD pins or controller errors. We rebuild the slot and attempt data recovery. Avoid reinserting a damaged card.
3. Does RP have IBIS?
No. Stabilization relies on RF lens IS. We service mount, sensor seat, and lens contacts for alignment issues.
4. Dark spot/lines in EVF after a sunny day.
Typical sun burn via eyepiece. We replace the EVF panel and verify optics. Use the eyepiece cap in backlight situations.
5. Camera stuck on logo after firmware update.
We reflash at service level, repair boot partitions, and test NAND. Settings preserved when possible.
6. Turnaround and warranty terms?
Standard 3–5 business days. Express 2–3 hours when parts allow. Warranty 1–3 months by job type.